About This

• GX Patented Design :GX features an exclusive four-stage compression system paired with an integrated water-cooled compressor structure, powered by an genuine 350W high-performance motor. It is very stable when working, and it is very quiet with only 70db. At the same time, it is equipped with a double-pointer pressure gauge, and the two-level setting auto-stop pressure, which is more secure. This distinguishes it from others, which merely add water circulation devices to small shoebox-style compressors on market.
• A water tank and a grease tank are designed on the top of the compressor. The excellent cooling can achieve 5 hours of continuous work and can fill a 3L gas cylinder. Note: For the first use, it must be filled with about 300ml of antifreeze ( Distilled water is not recommended.). Note: 1) Be sure to add neutral antifreeze if it freezes in your area. 2）:Do not turn the grease knob until after 4-6 hours of use, otherwise will cause bad performance. then turn it one turn. Search "how to add coolant for cs4" on youtube to learn the correct steps.
• 15% Faster Filling Speed: Filling 0.5L tank from 3000Psi to 4500psi ,only needs 4-5 minutes. Filling 0.5L from 0-4500psi, only needs 14-16 minutes. Filling 6.8L from 0 -4500psi, needs 2 hours and 40 minutes. Notice: CS4 and CS4-I are mainly used for high pressure, small gas cylinders below 6.8L, especially PCP. It is not recommended to fill large gas cylinders. Otherwise, you can choose 5K1 and 5K2.
• 12V DC input, you can use car battery or household outlet for power supply, equipped with 110V-12V converter. The machine is equipped with a built-in oil-water separator which is not a cotton filter and never needs to be replaced. This is an ideal choice for airgun . Suggest to buy GX professional external filter if you need enhanced filtration performance.
• Please read user manual carefully before turning on compressor. Quick connector : M10*1, 8MM female connector. Product size: 11.8*6.1*12.4 inch , weight: 29lb. ATTENTION: when filling is complete, please close the bottle valve first (when filling bottle) and then open compressor's bleed valve to release line pressure . All pressure must be released from compressor before starting.
• Note: when add coolant first time, add full tank, turn on switch (don't press start button), water pump will run, coolant will flow into inner water pipes, then keep adding more coolant until water tank is full.

Overview

• Brand : GX pump
• Voltage : 12 Volts
• Recommended Uses For Product : pcp compressor, paintball tank filling
• Power Source : Corded Electric
• Noise Level : 70 Decibels