About This

• 𝗘𝘃𝗲𝗿𝘆𝘁𝗵𝗶𝗻𝗴 𝗬𝗼𝘂 𝗚𝗲𝘁 𝘄𝗶𝘁𝗵 𝗡𝗧𝟲𝟯𝟬 𝗣𝗹𝘂𝘀 — 𝗡𝗼𝘄 𝘄𝗶𝘁𝗵 𝗙𝘂𝗹𝗹 𝗕𝗮𝘁𝘁𝗲𝗿𝘆 𝗧𝗲𝘀𝘁𝗶𝗻𝗴 + 𝗕𝗠𝗦: Built on the NT630 Plus, NT630 Pro combines ABS/SRS/OBD2 diagnostics with a full 12V battery tester. Check battery health, cranking and charging systems from 100–3000 CCA, plus ABS Bleed, BMS, Oil, SAS and EPB services on supported vehicles. Free Wi-Fi updates keep available software and vehicle coverage current. Function coverage varies by vehicle
• 𝗢𝗻𝗲 𝗧𝗼𝗼𝗹 𝗳𝗼𝗿 𝗧𝘄𝗼 𝗘𝘃𝗲𝗿𝘆𝗱𝗮𝘆 𝗖𝗮𝗿 𝗣𝗿𝗼𝗯𝗹𝗲𝗺𝘀: Warning light on—or the car is hard to start? Use the OBD2 connection to diagnose ABS, SRS and check-engine issues, or connect the battery clamps to check battery health, cranking and charging performance. Even if you mainly need a scan tool today, the built-in battery tester gives you another practical way to troubleshoot common battery and starting problems with the same device
• 𝗣𝗶𝗻𝗽𝗼𝗶𝗻𝘁 𝗔𝗕𝗦/𝗦𝗥𝗦 & 𝗢𝗕𝗗𝟮 𝗜𝘀𝘀𝘂𝗲𝘀 𝗮𝘁 𝗛𝗼𝗺𝗲: Read and clear supported ABS, SRS and OBD2 fault codes, retrieve ECU information, and view available live data such as wheel speed, brake-related signals and supported SRS data. Use code and data information to help trace warning lights back to sensor, wiring or module-related faults before replacing parts. Codes can be cleared after the underlying fault is repaired. NOTE: Airbag crash data or module reset is not supported
• 𝗙𝘂𝗹𝗹 𝟭𝟮𝗩 𝗕𝗮𝘁𝘁𝗲𝗿𝘆 + 𝗖𝗿𝗮𝗻𝗸𝗶𝗻𝗴 + 𝗖𝗵𝗮𝗿𝗴𝗶𝗻𝗴 𝗧𝗲𝘀𝘁: The built-in battery tester checks SOH, SOC, CCA, voltage and internal resistance, then evaluates cranking performance and charging-system output to help distinguish a weak battery from starting or alternator problems. Supports regular flooded, AGM, EFB and GEL 12V batteries from 100–3000 CCA. BMS registration is available on supported vehicles after same-spec battery replacement; battery coding or chemistry changes are not supported
• 𝗚𝗼 𝗕𝗲𝘆𝗼𝗻𝗱 𝗔𝗕𝗦 𝗖𝗼𝗱𝗲𝘀 𝘄𝗶𝘁𝗵 𝗔𝗰𝘁𝗶𝘃𝗲 𝗧𝗲𝘀𝘁𝘀: Go deeper than basic code reading with available ABS live data, freeze-frame information, and supported active tests such as pump and solenoid activation. Use wheel-speed and brake-related data to help isolate sensor, wiring, hydraulic, or ABS module faults before replacing parts. Available ABS active tests and live-data PIDs vary by vehicle and ABS module
• 𝗔𝗕𝗦 𝗔𝘂𝘁𝗼 𝗕𝗹𝗲𝗲𝗱 𝗔𝗳𝘁𝗲𝗿 𝗕𝗿𝗮𝗸𝗲 𝗦𝗲𝗿𝘃𝗶𝗰𝗲: On compatible vehicles, NT630 Pro can command the ABS pump and valves during the automated bleed procedure to help remove trapped air after brake-fluid replacement, caliper work, master-cylinder replacement, or ABS hydraulic repair. This can help restore a firmer pedal feel after service. ABS Auto Bleed is vehicle-specific; verify VIN-based coverage before purchase
• 𝟱 𝗨𝘀𝗲𝗳𝘂𝗹 𝗦𝗲𝗿𝘃𝗶𝗰𝗲 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀: Handle common maintenance with ABS Auto Bleed to help remove trapped air after brake service, BMS Registration after supported same-spec battery replacement, Oil Reset after routine oil service, EPB Service for supported electronic parking brake maintenance, and SAS Calibration after steering or alignment work. BMS supports registration only, not battery coding or battery-type changes. Coverage varies by vehicle; not every supported vehicle provides all five functions
• 𝗞𝗻𝗼𝘄 𝘁𝗵𝗲 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻 𝗦𝗰𝗼𝗽𝗲 𝗕𝗲𝗳𝗼𝗿𝗲 𝗬𝗼𝘂 𝗕𝘂𝘆: NT630 Pro focuses on ABS/SRS diagnostics, standard OBD2 engine functions, full 12V battery testing and selected maintenance services. It is not a full-system scanner and does not provide full-system module diagnosis, ECU/key programming or advanced coding. ABS Bleed, ABS active tests, BMS, Oil, EPB and SAS are vehicle-specific. Buying for one specific function? Verify the exact function for your Year + Make + Model + VIN before ordering

Overview

• Brand : FOXWELL
• Power Source : Corded Electric. NOTE: NOT support CCD protocol, no programming. Auto Bleed function is supported only on the right side for CHRYSLER/JEEP/DODGE vehicles, the left side requires manual bleed. Corded Electric. NOTE: NOT support CCD protocol, no programming. Auto Bleed function is supported only on the right side for CHRYSLER/JEEP/DODGE vehicles, the left side requires manual bleed.
• Operating System : Linux. For optimal performance and compatibility, go to the Update menu to check your APP & BooT version. If the version number appears in red text, please update it to the latest version. Linux. For optimal performance and compatibility, go to the Update menu to check your APP & BooT version. If the version number appears in red text, please update it to the latest version.
• Screen Size : 2.8 inches
• Automotive Fit Type : Vehicle Specific Fit